Racial Differences in the Corrections System Essay

â€Å"According to Black Star Project Executive Director, Phillip Jackson, in 2007 there were 321 African American men enrolled at Northwestern University (1.7 percent of the student body) but four times that number – 1,207- imprisoned at Western Illinois Correctional Center (60 percent of the prison population)† (Walker, Spohn & Delone, 2012). This is only one example of the astounding percentage of young black men currently serving jail time as opposed to pursuing a college education. Something must be vitally wrong with our criminal justice system, since it allows these staggering numbers to hold truth. Overall the total percentage of young African American males is almost five times more than that of their young white or Hispanic male counterparts. I find this statistic very disturbing and chose to research the why and how this is occurring. There are many possible reasons such as limited access to public health clinics, racial profiling, unfair judicial systems, racial differences in judges, lawyers, and law makers, poverty, and parental upbringing; to name a few. How do these young men get sucked into a life of crime, do they have an alternative or a role model to seek counsel form? The numbers do not lie and there must be sound reasons behind them. In this paper I will research and discuss the various reasons why young African American males are grossly over represented in the criminal justice and corrections facilities. While the overall white population is higher than the African American population, 10.4 percent of African American men between the ages of 25-29 can expect to spend time in jail, compared with 2.4 percent of Hispanics and 1.2 percent of white men. Throughout this paper I will discuss not only the staggering numbers but also the reasoning behind them and possible solutions or at the very least a starting point to help fix the problem at hand. â€Å"†¦People of color are disproportionately involved in the criminal justice system, as crime victims, offenders, persons arrested, and persons in prison† (Walker, Spohn & Delone, 2012). It Starts at a Young Age There is more than one reason behind the racial imbalance in the criminal justice system. Areas that have been evaluated are parental involvement, peer groups, neighborhoods, the individual, and racial discrimination at all  levels. It appears that the problem is present in the juvenile justice system as well, something is not working right if these children are not receiving the rehabilitation and or help they need to lead a non-criminal life. Redding & Arigo, 2005 state this about the number of African American juvenile offenders, â€Å"†¦compromising only 15% of the juvenile population†¦and 57% of the juveniles in state prisons† I decided to discuss juveniles because I found it interesting that they also represented a large number of the criminal offenders in the juvenile justice system in a very similar way that the 25-28 year old African American males do. Several avenues I researched concluded that African American’s have a harder time accessing health facilities such as metal health clinics, where many of the common mental health disorders that criminal offenders suffer from can be treated. â€Å"As many as 70 percent of youth in the system are affected with a mental disorder, and one in five suffer from a mental illness so severe as to impair their ability to function as a young person and grow into a responsible adult† (Hammond, 2007). It seems to me that if we can stop the current process at a young age, why wouldn’t we? Poverty and Single Parent Homes Walker, Spohn & Delone state that 9.4 % of white Americans live in poverty compared to a shocking 25.8% of African American’s that live in poverty. There are thousands of studies that link poverty and poor neighborhoods with criminal activity, both victim and criminal. With a quarter of the African American population living at poverty level it is not surprising that they also retain such a large portion of the inmate population. â€Å"Regardless of whether poverty is a cause or an effect, however, the conditions associated with poverty can work against the development of human capital—that is the ability of individuals to remain healthy and develop the skills, abilities, knowledge, and habits necessary to fully participate in the labor force† (Nilsen, 2007). If people are not allowed the opportunity to reach their full potential often times a life of crime if the only way to survive. The United States Government recognizes that there is a link yet the problem still exists. Yes there are federally funded programs such as Medicaid, Food Stamps, and Temporary Assistance for Needy Families, but the poverty level is still alarmingly high. â€Å"The most telling fact about poverty in the  United States is how thoroughly it is ignored† (Royce, 2009). While there is a link between poverty and crime, there is also a link between single parent homes or absentee parent homes and crime as well. The percentage of African American families run by a single parent, usually the mother, is astounding, â€Å"†¦50% of all black households with children under age 18 are headed by black women† (Bush, 2004). Often times the majority of these families live at or below the poverty level, leading to a higher chance of violence and criminal activity. The evidence above begins to show the reasoning behind why African Americans have the highest racial population in prisons. In addition they often are judged harder and serve longer sentences in jail than there non-black counterparts. While racial profiling seems to be a likely source I found various accounts of whether or not it is a direct cause of the higher numbers of African American men in prison, the problem seems to lie further up the judicial system. â€Å"Young African American and Hispanic males, in other words, face greater odds of incarceration than young white males primarily because the commit more serious crimes and have more serious prior criminal records† (Walker, Spohn & Delone, 2012). Even though they may commit more serious crimes, when sentenced next to a non-minority for the same crime, their sentences are often longer. Clifford Levy 1996 of the New York Times states,† black and Hispanic people sentenced for minor felonies or misdemeanors in New York were treated more harshly than whites in similar circumstances.† His statements are based on a study released by the Pataki administration. Higher Up the Judicial System Other areas that may lead to the disproportioned numbers in the jails are judges, juries, and lawyers. Next I plan to discuss the differences in race among the judges, juries, lawyers, and law makers. â€Å"The jury is the heart of the criminal justice system† (Cole, 2000). How can racially fair rulings be handed out if the jury consists of mostly non-minorities? Racially biased judgments could be a cause of the difference in numbers in our criminal justice system. â€Å"An analysis of Jefferson Parish, La., by the Louisiana Capital Assistance Center found that from 1999 to 2007, blacks were struck from juries at more than three times the rate of whites† (Dewan, 2010). In  additional differences amongst the jurors, judges and lawyers are mostly white males. â€Å"Combined African American and Hispanic representation among lawyers was 7% in 1998†¦ There are fewer active African American federal appellate judges today than when Jimmy Carter was President† (T he collaboration the, n.d.). The buck does not stop here, the racial inequality continues up the ladder to Congress, the Senate, and the House. The article Do Your Lawmakers Represent all Americans, or is it Time to Change Congress states, â€Å"The U.S. population includes 12 percent African Americans, 9 percent Hispanics, and 3 percent Asian/Pacific Islanders and other groups. Congress, however, is 87 percent white; 85 percent in the House and 96 percent in the Senate.† If fact black members of the three government bodies above are often times questioned about decisions and their backing status far more than their non-minority counterparts. These numbers back the idea that African Americans face a discriminatory criminal justice system that starts at the top. Unfortunately racial biased is still something that is ingrained in most Americans and until the minorities are fairly represented in the government and judicial system, racial inequality within these entities will still exist. Comparison As mentioned previously African American males face longer prison sentences due to the fact that they commit more serious crimes and have longer criminal records, in general, than white Americans. The racial differences also extend to length of time served, higher rate of convictions and prison sentences. â€Å"The national incarceration rate for whites is 412 per 100,000 residents, compared to 2,290 for African Americans and 742 for Hispanics† (Mauer & King, 2007). Incarceration rates are directly affected by the sentencing process. As one might expect African Americans and Hispanics face a harsher time during the sentencing process than white Americans. â€Å"Of the estimates of the direct effect of race on sentencing at the state level, 43.2% indicated harsher sentences for blacks, and over a quarter (27.6%) of the estimates on the direct impact of ethnicity registered harsher sentences for Latinos† (Kansal, 2005). Per the U.S. Sentencing Commission’s sourcebook of Federal Sentencing Statistics in 2007 the conviction ratio broken down by race is as follows: whites 28.8%, blacks 24.4%, and Hispanics 43%. Overall the percentage of African American males and Hispanics males that will serve  time in prison compared to white males is significantly higher. Structural Inequality Based on the information above I believe it is apparent that there is severe structural inequality starting at the top with the government down through to the jurors. How can racial unbiased laws be passed if the government writing them is made up the racial majority. It is impossible to truly understand what it is like to be a minority without living it. Some may say they understand and can make unbiased decisions, but the fact remains that without living the lifestyle this is impossible to truly accomplish, which is why African Americans and Hispanics must fight to increase their numbers within the governing bodies. Next the judicial system needs to be addressed; they face the same racial disparities that the government does. White judges and juries are handing out the majority of the convictions and sentences, including those handed out to the minorities. It is evidenced that African Americans face harsher sentences and longer jail times than their white counterparts. â€Å"Efforts should be made to reinstate judicial discretion into the sentencing process to permit judges to craft sentences that accurately reflect the charged conduct and circumstances of the offense and defendant† (Mauer & King, 2007). Efforts need to be made to correct the imbalances that the United States criminal justice system currently faces. Conclusion â€Å"To be sure, criminalizing young Black males and warehousing them in jails and prisons will further exacerbate the problems of racial domination and ossify the economic and social inequities structuring their everyday lives† (Hill & Lee, 2010). The evidence does not lie; there are sound reasons why African American males between the age of 25-29 have more of their population behind bars. It often times starts at home and works it all the way up to the top. The same problem has been recognized at the juvenile level. African American juvenile offenders represent with a higher number of their population in the criminal justice system. I found some interesting studies that link mental illness to criminal activity. Many families living in poverty have limited access to mental health clinics, thus a possible source of aggression and criminal behavior is going untreated. Poverty levels are still extraordinarily high and it has been proven that living at  or below the poverty level and in rough neighborhoods, leads to criminal activity. As many as 50% of the African American families at or below the poverty level are run by a single parent, leading to even more family strain and stress. Another area that is giving rise to the above mentioned numbers is the fact that the criminal justice system, itself, has very few minority members. The House, Senate, and Congress also are compromised of mostly white. The numbers do not correlated with the overall populations in the United States. White judges, lawmakers, juries, and lawyers comprise over 90% of the judicially system and government bodies. It is easier to understand why minorities are dealt harsher sentences, serve longer jail times, are convicted at a higher rate and hold a larger percentage in the prison system. With the current system in place and the obvious structural inequality within the criminal justice system, I fear that the numbers will not change. Action must be taken to incorporate the minorities into these governing bodies. The issue needs to be addressed at the juvenile level, by helping these troubled teens; their numbers may start to decrease at all age levels. The reasoning behind the numbers has been laid out, is know by most, and yet is still a problem. It is time to make a change, if not 1 in every black male born today will see the inside of a prison cell and this is not acceptable. References Bush, L. (2004). How black mothers participate in the development of manhood and masculinity: What do we know about black mothers and their sons? The Journal of Negro Education, 73(4), 381-391. Retrieved from http://www.jstor.org/discover/10.2307/4129623?uid=3739256&uid=2&uid=4&sid=21101002202873 Cole, D. (1999). No equal justice: Race and class in the american criminal justice system. New York: New. The collaboration the legal profession. (n.d.). Retrieved from http://www.lfoa.org/barnone/barnone_collaboration. Dewan, S. (2010, June 1). Study finds blacks blocked from southern juries. The New York Times. Retrieved from http://www.nytimes.com/2010/06/02/us/02jury.html?_r=1&scp=1&sq=Blacks Still Being Blocked from Juries in the South, Study Finds&st=cse Do your lawmakers represent all americans, or is it time to change congress?. (n.d.).

Declaration of Sentiments Essay

The Declarations of sentiments was arguably the most significant document in history for the advancement of women in the nineteenth century America. It was made famous at the first Woman’s Rights Convention, held in Seneca Falls, New York, in July of 1848. Drafted by Elizabeth Cady Stanton, the declaration outlined a series of grievances resulting from the unfair treatment of women and proposed eleven resolutions arguing that women had the right to equality in all aspects of their lives, including the right to vote. Despite the declarations significance, however, it would be seventy-two ears later that women finally won the right to vote. In early societies, women bore children, cared for the home, and helped maintain the family. Males dominated in early society from the time of the earliest written historical records. It was believed that women were naturally weaker and inferior to men. Therefore, in most traditional societies, women generally were at a disadvantage. Women were not allowed to vote, work, get an education, or be involved in the church. Married women were legally dead in the eyes of the law and had no property rights. Women had to submit to laws when they had no voice in their formation. In early society, women were robbed of their self-confidence and self respect. The events leading up to the 1848 convention date back to 1840, when Stanton attended the World Anti-Slavery Convention in London and was denied a seat at the convention because she was a woman. She then attended a small social gathering near her home in Seneca Falls, where she laid out her list of grievances about the treatment of women in society. From this small gathering the convention was then planned and the Declaration of Sentiments was formed. The Declaration proposed reforms in all areas of women’s lives. Included in the declaration was a list of eighteen injustices endured by women, ranging from the lack of equal educational opportunities and the denial of the right to vote, to the exclusion of public participation in the affairs of the church. It also protested unequal employment opportunities. Stanton read the declaration paragraph by paragraph, and over the two-days of discussion, the Declaration of Sentiments and 12 resolutions received agreement endorsement, one by one, with a few amendments. The only resolution that did not pass unanimously was the call for women’s authorization. The Seneca Falls convention generated widespread ridicule and even hostility, primarily from religious leaders and the press. An article in the Philadelphia Public Ledger and Daily Transcript (September 1848) opined that, unlike the Seneca Falls women, the women of Philadelphia were â€Å"celebrated for discretion, modesty, and unfeigned diffidence† rather than â€Å"standing out for woman’s rights. † After all, the writer reasoned, â€Å"A woman is nobody. A wife is everything. A pretty girl is equal to ten thousand men, and a mother is, next to God, all powerful†¦Ã¢â‚¬ ¦The ladies of Philadelphia, therefore†¦.. re resolved to maintain their rights as wives, belles, virgins, and mothers, and not as women† (Stanton, Anthony, and Gage, p. 804). Women’s rights conventions were held on a regular basis until the start of the Civil War. Elizabeth Cady Stanton traveled the country lecturing and organizing for the next forty years. Winning the ri ght to vote was the key issue, since the vote would provide the means to accomplish the other reforms. The campaign for woman’s right to vote ran across continuous opposition and took 72 years for the women to win. During the Women’s Rights Movement, women faced incredible obstacles to win the American civil right to vote, which was later won in 1920. At a time when traditional roles were still very much in place, the declaration caused much controversy. Many people respected the courage and abilities behind the drafting of the document, but were unwilling to abandon conventional mindset. An article in the Onida Whig published soon after the convention described the document as the most shocking and unnatural event ever recorded in history of womanity. Although it would be many years before women finally won the vote, the 1848 Seneca Falls Convention had set the wheels in motion. Without question, it was Stanton’s Declaration of Sentiments that first politicized the issues that would take center stage in the struggle to attain equality for women. In today’s society, women now are more respected and are accepted to do many jobs. Women of those years effected the women of today by giving them hope and acceptance of their right to decide how they would like to live.

A piece of wire on the resistance Essay Example for Free

A piece of wire on the resistance Essay ? Resistance gives us an idea of how easily electrons flow through a conductor it is the opposition of a material to the flow of electricity through it. It is caused by the internal structure of the material and its atoms, and tends to convert electrical energy in to heat. It is measure in ohms (? ). To measure resistance you must first find the voltage, which is the change in current between to certain points in a circuit. Electricity gives us a way of transferring energy and voltage is a measure of the energy available per coulomb of charge passing. Then you also need the current, which is measured in amps, electrical current as occur when there is a drift of charged particles (electrons or ions) in a particular direction. However there are some effects of the current flowing through a wire, it tends to heat up. If you divide both the voltage and the amps you get the resistance. Resistance = Potential Difference (in V) Current (in A) There are four main factors that effect resistance, these are: As temperature increases, the resistance of the wire increases as well. Some metals are better conductors than others, for example Nichrome has more resistance than copper. The thickness of the wire affects it as well because the thicker the wire the more resistance there is.   And the one I am testing- As the length of the wire increases, as does the resistance because there is further for the energy the travel so it looses energy along the way. In 1826 Georg Ohm discovered that ‘the current flowing through a metal wire is proportional to the potential difference across it’. In other words if you double the potential difference the current is also doubled. However this law is only obeyed when all the conditions stay constant. However the shorter the wire the more energy is converted into heat due to more atoms for the electrons to collide with. So the wire temperature increases which was one factor that Ohm did not take into consideration. A battery supplies voltage to the circuit between its terminals. Ideally the voltage should stay constant, however it does not, this is because the battery itself has resistance and acts like a resistor. This is called internal resistance. Prediction: I predict that as I increase the length of the wire the resistance will also increase, because as the current goes through the wire the electrons lose energy because they collide with the atoms of the metal and they lose the energy via heat loss. This causes there to be a decreases in the push force that move the electrons around the circuit. If the wire is longer there will be more collisions and so the electrons will lose even more energy thus losing the push force. If I double the voltage the current will also increase because voltage and current are both proportional. However as stated above in my research I shall not expect this to be exactly correct because not everything in my circuit is not remaining constant the temperature of the wire should increase. Equipment: Energy source (batteries) Ammeter   Volt Meter   Metal wire 5 wires Plan:   I will set up my equipment ensuring that the volt meter is parallel to the metal wire I will then insert the 30 cm long wire and measure the amps and volts Then I will take away 5 cm off the wire and read off the ammeter and volt meter   I will repeat this till I have a 5 cm piece of wire. Diagram: Ammeter Volt Meter Wires Metal wire Batteries Preliminary Results and Changes: Length (cm) Voltage (V) Amps (A) Resistance 30cm cm After doing my preliminary experiment I have decided to do the test every 3 cm so it will go 30cm, 27cm, 24cm, 21cm etc. Results Results table 1 Length (cm) Voltage (V) Amps (A) Resistance 30cm. Results Table 2 Length (cm) Voltage (V) Amps (A) Resistance 30cm Results table 3 Length (cm) Voltage (V) Amps (A) Resistance 30cm Average Result for resistance Length of wire (cm) Average Resistance Conclusion I can now conclude that the resistance increases as the voltage (and current) increases because energy is lost as the electrons go through the wire and collide with the atoms. Having looked at my results and graph I can also conclude that the resistance is directly proportional to the length of wire because my graph is fairly straight. Despite the fact that hardly any off my points are exactly on the line, they follow the line of best fit and are very close to it. This shows that the resistance increases as the length of the wire increases due to more atoms for the electrons to collide with (see prediction and research for further details). Gradient y1 – y2 Two points: This shows that my line of best fit goes up very gradually. The graph that I have drawn is very misleading because it looks as though the line goes up steeply; this is because my scale is very big. If I half the scale my line would appear to go up at half the steepness. Resistance per centimeter   Evaluation My results in my opinion are fairly reliable we have the odd result as with most experiments, however on the whole our results and graph show that the current is directly proportional to the voltage and that was our aim in the beginning. Our graph is reliable despite the fact that only two results actually touch the line (this could be due to back readings off or a fault in our method) because all of our results follow the line and are very close to it. Regardless of getting reliable results except a few anomalous results we could have improved our method by ensuring that we had the set amount of wire in between the clip, for example 30cm, because when you add the clips it takes of about 2 cm so we could all of the experiment with the wire 2cm longer. Also as stated above in my research temperature has to remain a constant, which it was not because the smaller the wire got heat was lost so the resistance would be higher so maybe our lower results are not as reliable as the higher ones. Abigail Male 1st February 2002 Show preview only The above preview is unformatted text This student written piece of work is one of many that can be found in our GCSE Electricity and Magnetism section. A piece of wire on the resistance. (2017, Oct 19).

Accounting 1 Essay Example | Topics and Well Written Essays - 500 words - 1

Accounting 1 - Essay Example The organization had elaborate risk assessment about which every employee was cognizant. The organization conducted risk awareness and emergency response training regularly. Fire extinguishers were regularly checked and replaced and there were notices providing information on what do in the event of a hazard. The management routinely supplied employees with the latest information on common and emergent risks. I realized that the organization monitored and reviewed its internal controls periodically. The petty cash was checked at the end of every week and recommendations given on what to avoid and what to improve. Internal controls that were found ineffective or failing after monitoring were replaced and others were improved in order to enhance their functionality. The organization had a comprehensive yet simple way of reporting risks to the relevant officials in which everybody knew the most immediate person to approach. The organization had good information and communication system in place. The management issued memos in good time when calling for a meeting and every employee was issued with a copy of previous meeting’s minutes with the day’s agenda. The management was respectful in the way it summoned employee for disciplinary action and they did not let other employees know about it. The most outstanding element of the organization’s internal controls was its control activities. The duties of different individuals were separated and every individual knew what they were supposed to do and what to forward to the next person. This was most evident in the accounts department where duties such as approval of purchases, reception of deliveries, approval of invoices, review, and reconciliation of financial records were handled by different people. There were clear procedures for transactional authorization where there were officers entrusted with authorizing purchases and payments. No such transactions could be undertaken

Aristotle Quote Essay Example | Topics and Well Written Essays - 250 words

Aristotle Quote - Essay Example Aristotle implies that every person should carefully analyze the circumstances of each situation and apply this advice, seek for an even solution. What is important is finding a mean of solving a situation, not necessarily by following blindly the general moral principles, but by carefully equilibrating one's hopes and desires in relation with the social demands. Aristotle suggests that circumstances dictate and sometimes even stand as an excuse for our behavior, but passion should not influence the core values of courage or boldness, depending on the case. Emotions and passions cannot be silenced and they do shape our life as humans, but the deliberation over a situation in a reasonable manner grants, if not always a clear solution, at least a better and, certainly ethical, aim in life; that aim is to make the best of our 'practical reason' that we can only acquire by learning how to act far from anxiety and pure instinct, under the influence of ethical values.

Benchmarking Essay Example | Topics and Well Written Essays - 750 words

Benchmarking - Essay Example There years later, the Company went public, with a valuation of $300 million and commenced sales of the GeneChip system. At the time of the public offering, Affymatrix’s R&D expenses were $12.4 million but by the year 2000, its expenses had risen to $57.4 million and its product sales were $173 million (www.atp.nist.gov). Sources of funding for Affymetrix R&D work have been primarily through licenses and patents and collaborative partnerships with several firms to test out its products. Companies with whom Affymetrix worked in the initial stages include Hewlett Packard, Genetics Institute, Incyte, Glaxo and Perlegen. By 2000, Affymetrix had 105 patents with 10% of the company income contributed by license and patent fees (www.atop.nist.gov). Additional sources of funds are Government and research grants, which are a part of the Company strategy to maintain an academic environment without sacrificing entrepreneurship. This strategy also helped to attract a pool of talented researchers who were thus able to develop marketable products of economic value for the Company. Net income reported by the Company for the third quarter of 2005 was $8.7million as compared to $15.4 million the same time last quarter.(www.corporate-ir.net). But in contrast, other biotech companies all reported earnings higher than expected for the third quarter of 2005, with the Burill Biotech Select index rising on a steady basis and most of the recent IPO graduates are doing quite well.(www.altassets.com). It is only Affumetrix that has reported a drop of 16% in share prices from $0.24 per diluted share in the third quarter of 2004 to $0.13 per diluted share for the third quarter of 2005. As compared to the third quarter of 2004 when operating costs were $65.1 million and revenues were $2.7 million, the third quarter of 2005 showed an increase in

Popularity of Java Research Paper Example | Topics and Well Written Essays - 1000 words

Popularity of Java - Research Paper Example The popularity of Java is not without a reason, but it stems from several attributes that make developers choose this programming language. Java remains popular because it is robust, secure, easy to use, and portable. Java is robust Java has several attributes that make it a robust programming language as compared to other alternatives such as Visual Basic or C++. Firstly, the creators of Java created this program with network operations in mind. There are a few programing language that can handle communication between networks like Java does. With the popularity of using the internet to deliver distributed applications, Java became the popular choice of many developers interested in exploiting network functionalities. The success of Java to boost the development of distributed system rests on the fact that Java is portable (Birkland, 2003). In java, programmers have access to libraries that allows them build scalable applications that communicate through the network using protocols such as TCP/IP. In addition, Java allows the use of HTTP and FTP protocols making the java program popular. It’s the ability of Java applications to work across networks that made the language popular among many developers targeting the internet as their medium of distribution. Java is also robust because it provides programmers with powerful exception handling, a feature absent in other programming languages. The choice of Java among many programmers stems from the fact that Java is out of box programming language that enforces strict type checking. This implies that developers have the ability to detect and make correction of issues while still developing applications. This characteristic allows java developers to worry less that their programmers will not work after they are compiled (Birland, 2003). Moreover, when java programs encounter errors, the error handling feature allows them to handle the errors and prevent the application from crashing. This trait of Java is a p ull factor that makes programmers builds robust application. With the development of applications using Java less error prone, many developers prefer using java. Automatic memory management in Java makes this programming language a robust platform for developer to build enterprise class applications that have high performance. When an application is running, memory management is one of the fundamental processes that assure programmers of correct applications that run with no errors (Manuel, David, Katzalin, 2012). With java, the process of tracking used and unused memory is a function of Java and not the programmer. This implies that Java programming give developers that assurance that their software will handle memory efficiency and avoid runtime errors that could crash the application. Without an automatic memory management process, programmers have the duty to allocate memory to processes and reallocate the memory once they are in use. With memory management in java being an auto matic process, many developers prefer using Java as their programs are less prone to memory management issues. Java is a secure programming language The develop community tout java as a secure language that allows secure transaction across networks. The structure of java programs ensures that java programs execute within the java runtime environment and not outside this scope. This feature of java ensures that

The dimensions of the Decision-Making Processes Research Paper

The dimensions of the Decision-Making Processes - Research Paper Example One of the widely suggested approaches to effective organisation management is proficient leadership. Proficient leadership is particularly needed to deal with the decision-making process. This is in consideration to the fact that success relies on how smart the decisions are made. However, the decision-making process appears to be a complicated subject, considering the common blunders that are committed by the managers, the underlying factors and the imperatives of the process of making decisions. This paper aims at exploring the imperatives decision-making process in organization, including the factors that affect the decision-making processes. Literature perspectives about the decision-making process and organization Literature information regarding the decision-making process, it challenges, imperatives and dimensions is well documented. According to Schwartz (2013), what makes a manager worth is if he can make decisions that are sound. Schwartz (2013) argues that all the other r oles of managers or organization leaders are dependent on how the decision-making processes are executed. The roles of leaders are effectively elucidated based on principles of proficient management, as documented by Madura (2007). Here, proficient leaders are expected to execute a range of functions. These can be enlisted as controlling, organizing, leading, staffing and planning. Planning can be described as the process where mapping is done to achieve certain goals. In the case where the goals of the organizations are seeking sale improvement, the leaders are needed in devising decisive steps that would enable the organization realize these. Such decisive steps could include conducting recruitment or offering training to the teams responsible for sales and even increase advertisements. Such steps are what would be considered to add up to a plan that enables companies achieve success. After the plans have been executed, the leaders should go further in mobilizing the resources and necessary materials in accordance with the plans. Such a process is known as organizing. Essential to organizing is giving the authority for the activities to be carried out, and this includes making assignation of the tasks. In all these processes, it will always become necessary for them to conduct recruitment of additional employs or offer training to the existent employees, and this could be labelled as staffing. More often than not, this is often done by the departments of human resource. This also requires that proficient leadership is to be exercised. Leading is also pivotal in the sense that it is a process that involves making communications, offering encouragement, motivation and guidance to the team members so that the goals can be achieved. This role does not only require one to assist, but also coach and help with solving problems. Lastly, controlling is also another pivotal role. Leaders are required to monitor the results in a continuous fashion. They are also requir ed to implement various forms of correction that ensure the intended outcomes are achieved. There is further suggestion that every member on the management teams is to perform such functions, only that the time that is set aside for the execution of this may vary (Trompenaars 1993). While this point may serve to consider the managers and leaders as synonymous to perform

Moratorium on Deep-Water Drilling For Retail Gas Prices Coursework

Moratorium on Deep-Water Drilling For Retail Gas Prices - Coursework Example Marathon’s Product Process The production process in MPC takes place in three phases, i.e. refining, transporting, and marketing. The refining phase is executed with the assistance of sis-plant refinery network system. Crude oils gathered from the supply markets of Midwest and various parts of Southeast are refined in these plants with the capacity of around 1,142,000 barrels per day (bpd) accumulatively. Notably, two different types of crude oils are refined in these plants, i.e. sweet crude oils (46% approx) and sour crude oils (54% approx) which are collected from national as well as international suppliers. These refineries are located in six different parts of the continent, i.e. Louisiana, Kentucky, Illinois, Michigan, Ohio and Texas. The refineries are not only different in terms of their location but are also diverse in terms of sizes and their strengths (as cited in Marathon Petroleum Corporation, 2011). ... In this context, the biggest limitation of the company shall be recognized as the integrated management system implemented in its refining phase of production. This indicates the refining phase of production process to be open for greatest number of efficiency improvements. It is due to the fact that all the six plants tend to be different from each other to a large extent in terms of operations, size and strengths. Thus, it is likely to become quite challenging to manage the vivid operations through the implementation of an integrated plan. 2.0. Relationship between the Retail Price of Gasoline and World Demand for Crude Oil Experts have stated that the retail price of gasoline and the price for crude oil are asymmetrically related to each other. To be illustrated, the retail price of gasoline is examined to rise substantially with the rise in the price of crude oil. However, the retail price of gasoline tends to fall leisurely when the price for crude oil substantially minimizes. This presents an asymmetric relationship between the two fac tors (Balke, Brown, & Yucel, 1998). On the similar context, the price elasticity of demand for crude oil is termed to be least, i.e. with a significant rise in the crude oil prices; it is likely that the demand for the product will diminish but not extensively (Cooper, 2003). Therefore, it can be stated that the global demand for the crude oil and retail prices of gasoline are asymmetrically related. This indicates that fall in demand due to the price increase of crude oil will have an inverse impact on the retail price of gasoline resulting in substantial price hike of the commodity.

Poems by Blake and Wordsworth Essay Example for Free

Poems by Blake and Wordsworth Essay Two aspects of London as shown through a response to poems by Blake and Wordsworth. When comparing Blake and Wordsworths pieces, the respective perspectives of the authors should never be far from our thoughts. Whereas Blake lived in London his whole life and seldom ventured outside its borders, Wordsworth was a rural person whose only experiences of London came from short visits. Unaccustomed to the hustle and bustle of City life, Wordsworth led a comparatively relaxed existence which perhaps accounts for his romantic and gentile style. We should not be surprised to see that Blake, a frequenter of the less-desirable districts of the capital, offers a far more cynical portrayal of London. Blakes poem is a social commentary which points an ugly finger at the industrialist pioneers and the flaws of Industrial society. Blake was a renowned radical of the era with far-reaching ideas. He uses many literary devices to impart his opinions upon his audience. This is superbly demonstrated when he writes: I wander through each chartered street The reference is a metaphorical reflection on Blakes perception that anything and everything is for sale in an industrial society and, in particular, in its impoverished areas. Repetition is clearly employed when the piece claims: In every cry of every man, In every infants cry of fear, In every voice, in every ban, The mind-forged manacles I hear The repetition could be equated with anything from the machinery at work in the factories and mills, to an assault of stabbing pain upon those suffering in poverty. Within the framework which Blake creates, the reader is left to determine his own idea of what the repetition may represent, and this is at the centre of the verses success. Irony is employed with great effect in the verse beginning How the chimney-sweepers cry. The author contrasts the poverty and ill-health of chimney-sweeps with the wealth of the church, and suggests that instead of helping the poor the church pays them a pittance to work in hazardous conditions. Irony often stands side by side with black humour, and both are well-demonstrated in this verse. The amusing of the reader with a subject which should not amuse serves to further draw them into the piece. In the latter part of the same verse, emotive comparisons are made between the plight of Londons less-fortunate and warfare. Blakes use of the word soldiers is no accident here; for soldiers are tools of war, and must have opponents. This leads the reader to ask: with whom are the soldiers at war? As Marx foretold and the French Revolution demonstrated, the working classes and those controlling the means of production operate with opposing aims. Blake brings a new element of severity to the situation by suggesting that forces are at work against the poor subjects. INSERT LAST VERSE DISCUSSION HERE Wordsworth is blissfully unaware of the scenes which Blake paints. Indeed, Wordsworths London is so far removed from Blakes that one is led to ask whether the two are writing of the same city at all. There is a significant period of time between the two which could arguably account for this; Wordsworths work being written before the Industrial Revolution and Blake at its height.

Strategies for Achieving Sustainable Built Environment

Strategies for Achieving Sustainable Built Environment Energy constraint and global warming are becoming the key challenges encountered by the world today. Major amount of energy is being used by the building sector for achieving comfortable thermal conditions. Fifty per cent of energy consumption is due to buildings. (Melet, n.d., p.06). Demand for Energy is increasing rapidly. The U.S. Energy Information Administration (EIA) in its (IEO, 2011) International Energy Outlook 2011: states that world energy consumption grows by 53% from 2008 to 2035. The U.S. Energy Information Administration (EIA) is the statistical and analytical agency within the U.S. Department of Energy. It studies and broadcasts energy information to make proper decisions regarding energy efficiency, public understanding of energy usage and proper policymaking. (EIA, September 19, 2011). Sustainable and climate responsive architecture offers feasible solutions to these challenges. Since the pre-industrial era Global warming is one of components which led to Environmental Degradation. Global warming which has risen by 0.7 °C since the last 300 years is likely to be increased by up to 8 °C by 2050 according to the (IPCC, 2007). IPCC i.e. intergovernmental panel on climate change is a leading organisation for the assessment of climate change. It also states that almost 90% of the warming in the decent decades is caused by energy related human activities, mainly because of CO2 emissions due to the burning of fossil fuels. (IPCC Fourth Assessment Report, 2007).Thus there is a need for urgent action to design buildings to protect us from the effects of climate change and global warming. We have to know from where we are coming to know where we are going- Charles Correa. There is a need to transform the past knowledge to act as a catalyst for the future. Tradition and Modernity are two sides of the same coin and must be dealt with simultaneously. Some of the Architects who have used this into practicality are given. Hassan Fathy did not use any hi-techniques of air-conditioning, instead according to him it is very important to study and understand natural physical properties of heat, wind and water which are the natural environment controls. It is very important to know how native materials can be improved and developed via new techniques, to meet the present day needs. Francisco Bobby Maà ±osa feels that prejudices against older materials can be overcome and exciting new possibly can be created. Charles Correa via his design philosophy of transfer and transformation re-integrates many older fundamental ideas, into his modern designs, which recognises the problems of today, yet show a deep respect for Indias culture and tradition. (Pearson, 1994, p. 122-124). The new Architecture has its roots deep in Vernacular tradition, which is rich in messages that are becoming more and more relevant to our time- messages that help us remember humility and a belonging to the Earth (Pearson, 1994, p.08). For 100 of years common builders have managed to build using small amount of available energy resources without affecting the surrounding environment, thus using it in a sustainable manner. These practices should be used in the conventional architectural practice of today, which are accountable for Environmental crisis. In the midst of great technological, environmental and political change over the past decades, the vernacular has become highly relevant over the past decades either as a technological example, or as a politically strategic element. Given that architecture is inevitably connected to technological developments, environmental issues and political change, vernacular architecture has thus become a central concept in Architectural theory and Practice. (Arboleda, n.d.). Introduction: The assessment of energy and comfort conditions is the most important factor in determining the architectural process. Energy efficiency and renewable energy are the most important aspect of sustainable design. Even climate and environmental conditions play a major role in a building design. The main purpose of designing a building is to create suitable condition for human comfort. Traditional builders used limited and naturally available materials to achieve comfort and climate was the major contributing factor in traditional building techniques. Due to the ever growing global concern, use of energy and limitation of resources it is the responsibility of an architect to design buildings which are sustainable. For creating sustainable building it is very essential to ascertain the basics from where this science originated. There therefore arises a need to look back in the past as how our ancestors built their own homes taking care of function, religion, social and spiritual values and above all adapting to the climate for making a comfortable living. So it is very important to study from the past traditional structures built by our ancestors without the use of modern technology and to make use of it in the present scenario for making sustainable built environment. The study of history of vernacular buildings has demonstrated throughout that the buildings have prominent sustainability, whilst fanciful architectural forms do not; they are pleasant and are to preserve the cultural messages they convey. (Ryan, 2011, p.51). According to (Arboleda, n.d.), over the last decade Vernacular studies have become established in the mainstream architectural discourse due to the following 3 reasons: Global Communication technologies: Since the 1960s there has been a great awareness among architects because of the easy and extensive access to the knowledge of traditional communities Global Environmental Crisis: Contemporary interest in this subject has arisen due to resource depletion, global warming and energy crisis. Global Politics: Vernacular Architecture is a valuable tool in the ethno politics. It is a key in ethnically sensitive projects, thus maintaining the cultural identity. Due to these ethno sensitive programs traditional elements are used in the making of new structures but by modernizing or re-engineering it, thus making it modern Vernacular or neo-Vernacular. The Meaning of Vernacular Architecture: The term vernacular originates from the Latin word vernaculus which means local, natural or original developed from Verna, meaning native slave or home-born slave. The numbers of factors which define a vernacular building are based upon time immemorial building techniques, use of naturally available materials, also location of the buildings and its usage. It is passed on by the word of mouth, and materials which are readily available. In addition it is a system invented by the local craftsmen and occupier. Vernacular Architecture can also be called as a structure created by an amateur without any education in this type of designing method. Thus it is a traditional method of building which is passed on from generation to generation. The method of constructing is based upon traditional practices and techniques. It is usually built with the help of family, clan or builders in the tribe and reveals a high level for craftsmanship and quality. The function of the building is the most governing factor followed by aesthetic consideration and use of local materials. Geographic environment is a very important factor seen in a typical Vernacular building; a sloping roof surface is made to bear the rainfall, a circular house form to oppose cyclonic winds, a thick flat mud roof for cooler interior space and to take out the heat of the sun, an inner courtyard for open space. In hot and dry climates, for example, buildings were shaded to avoid unbearable summer sun by tall vegetation, rock overhangs, or, in flat deserts, the courtyard building form. They were placed such that they could also receive the pleasant warmth of the winter sun. (Pearson, 1994, p.95). This shows that vernacular methods are the most traditional method of building structures which are responsive to climate. Factors leading to development of Vernacular form: Vernacular buildings are human constructs which are results of the interrelation between ecological, economical, material, political and social factors. (Asquith, L and Vellinga, M (Ed.),2006, p.110) Bakers remarkable work is seen from the way he uses environment, traditional methods, comfort, culture and technology in his works. (Bhatia, 1991 ,p.3) There is an overlapping of traditional techniques of climatic conditions and vernacular styles. Historically, practical devices were slowly embellished and generalised through repetition to become a part of an architectural vocabulary, a process Charles Correa describes one of the generating forces of architecture. Charles Correa tries to incorporate cultural values and traditional techniques in his process of designing considering the lifestyles of Indian people. (Hagan, 2011, p.116) Tadao Andos works shows compositions, which consists of mainly use of simple forms and visible use of concrete material. In most of his works the use of nature, space, character, climate, weather, and cultural background can be clearly seen. He believed that when greenery, water and light is abstracted through nature the form becomes sacred. (Nute, 2004, p.86,87,88) Vernacular architecture is influenced a lot by human behaviour and environment, leading to different building forms for every different context. Thus from the above references it is clear that there are various factors which lead to the origin of Vernacular form: Climate Materials and technology Site features Religion Economics Socio-cultural considerations The factors which directly regulate the form are: Climate Socio-cultural considerations Religion The factors which indirectly relate show that they restrict the evolution of form but do not essentially regulate the form: Materials and technology Site features Economics Materials and technology: It does not necessarily define the form of a house. Even if same material and technology is used in a particular society yet the forms would vary depending upon the function and culture as well. Site Consideration: Site features may restrict the house form but it does not decide the form. On similar site different house forms can be seen whereas on different sites similar house can be seen. Economics: The economy may affect the size of the house or type of materials and techniques used but does not affect the form. A society with same economic conditions may have different house forms due to socio-cultural values. Due to different views and thoughts people with similar economy may choose different house forms. Religion: Religion cannot totally determine the form alone but plays a direct influence in its evaluation. Religion can have a strong influence on the form, plan, spatial arrangements and orientation of the house. Many houses are built according to religious influence of the society. Socio-Cultural Factors: Socio-cultural or traditional methods of using a place can have direct effect on deciding the form of house. Both physical and socio-cultural aspects affect the form. The physical setting may provide several possibilities but actual choice gets restricted due to cultural factors. Climate: It is the most important factor in determining the form. Due to different climate in different countries the form is found to be similar. The poor thermal performance of the building in spite of using technologically advanced environment systems suggests that one needs to consider the physical environment while generating a building form. Aim: To analyse Vernacular architecture in achieving Sustainable Built Environment for Contemporary structures. Objective: To study the origin of traditional houses and examine its sustainability. To study traditional building material, their sustainability and the contrast with modern architecture. To study thermal performance of Vernacular building materials. To study the role of Building regulation in the sustainability of traditional building construction. Research Question: How can traditional methods of architecture be incorporated in modern buildings? How can the revival of the vernacular in the present contemporary architecture help it to become more sustainable inheriting cultural roots? Methodology: Although Vernacular Architecture is emerging as a very developing area of study, still much needs to be done theoretically, metholdologically and through recording and documentation, before applying it to twenty-first century. (Asquith, L and Vellinga, M (Ed.),2006, p.03) Following are the methodologies used for the research. Literature Review: To read and analyse in depth about Vernacular Architecture using some of sources which includes digital media, web sources, books, published journals in related disciplines, scholarly articles and published papers. Qualitative Survey Using Live Case Studies: Conducting the Case study using Collecting the Evidence method is used here. (Yin, 2003, p.83) Sources of Evidences which will be used here are as follows. Historical Documentation- This type of documentation can be done by using data collected through local libraries or other reference centres. The documents could be proposals, progress reports, internal records, newspaper clippings and other articles appearing in mass media or in newsletters. Interviews- It is the most important part of the case study. Structured Questions will be used as a type of interview along the lines of a formal survey. Such survey can be designed as a part of case study and produce qualitative data as a part of the case study. (Yin, 2003, p.91). Here interviews with building industry professionals will take place (if the project is complete) or interview of workers or managers (if the site is an on-going project). Post occupancy questionnaire will be prepared for the present occupiers of the site to know their perception of the site. Post occupancy evaluations provide an indication of major successes and failures in a buildings performance. They can be used to improve and explain the performance of a building and are useful not only to the occupants and owners but also to the designers, who can learn about both their mistakes and successes and can apply these findings to future projects. Direct Observation- It includes field visits to know some relevant behaviour or environmental conditions. Observational evidence is often useful in providing information about the site. Physical Artefact- Here it could comprise of material being used on the site or any other physical evidence to find out the sustainability of the structure. Analysing Case study Evidence- While analysing the interviews and the questionnaire some common topics will be listed and a checklist will be prepared and the selected case studies will be evaluated against the topics in a checklist. Reporting Case Studies: A standard approach called Linear analytical Structure will be used here. It consists of findings from the data collected and conclusions and implications from these findings. Work Plan: Weeks Activity 1-2 Literature review: Understanding the background of the topic reading various books, journal articles etc. 3-6 Historical Documentation: Collecting data from various sources on vernacular Architecture. 7-9 Case study: It includes both interviews and field work which could be done simultaneously. 9-12 Compilation of data: Review all the collected data, edit and compile it and re-phrasing it in the form of a detailed dissertation report. Possible Outcome: The main aim of the research is to manifest and prove that Vernacular architecture is a solution for todays Sustainable Design principles. The vernacular architectural studies will provide useful insights for designing contemporary structures by taking evidences form the Vernacular structures of the past.It also aims to look into strategies which could be cost effective in construction and specification.The final outcome will be in a form of conclusion report from the case studies which will help in designing contemporary structure using climate responsive design concepts. References: Arboleda, Gabriel.(n.d.). Traditional, vernacular and ethnic architectures from http://www.vernaculararchitecture.com/ Asquith,L., Vellinga,M.(Ed.). (2006). Verncaular Architecture in the twenty-first century: theory, education and practice. Abingdon, Oxon., USA and Canada: Taylor and Francis. Bhatia, Gautam.(1991). Laurie Baker: life, work, writtings. New Delhi, India.,London, UK.,USA, Victoria, Australia., Ontario,Canada.,Aukland,Newzealand: Penguin books. Eia Independent statics and Analysis: U.S. energy information administration. (september 19, 2011) from http://www.eia.gov/forecast/ieo/index.com/ Mellet, Ed. (n.d.). Sustainable Architecture: Towards a diverse built environment: NAI Publishers. Nute,K.(2004). Place, time and being in Japanese architecture. New Felter lane, London., USA and Canada: Routhedge. Pearson, David. (1994). Earth to spirit: in search of natural architecture. London, U.K.: Gaia Books limited. Parry, M.L., Canziani, O.F., Palutikof, J.P., Vander, Linden., Hanson, C.E. (Ed.). Climate Change 2007: Impacts, adaptation and vulnerability. Cambridge university press from http://www.ipcc.ch/publications_and_data/publications_ipcc_fourth_assessment_report_wg2_report_impacts_adaptation_and_vulnerability.htm Ryan, Carol. (2011). Traditional construction for Sustainable Future. Abingdon, Oxon., USA and Canada: Spon Press. Susannah, Hagan. (2001). Taking shape: A new contract between Architecture and Nature.Jordan, Oxford: Architectural Press. Yin, R.K.(2003). Case study Research: Design and methods. Thousand Oaks, California., London, UK., New Delhi, London: Sage Publication Inc.

The Mission Essay example -- essays research papers

â€Å"The Mission† is a motion picture, directed by Roland Joffe in 1986, about a Jesuit mission that is threatened by greed and imperialism in the late 18th century in the Brazilian jungle. Father Gabriel, played by Jeremy Irons, climbs the mountains of Brazil to bring Christianity to the natives. He is successful and brings about a golden age among them. Mendoza, played by Robert De Niro, a slave trader, kills his brother, Felipe played by Aidan Quinn, in a fit of rage over a woman named Carlotta, played by Cherie Lunghi. Only Fr. Gabriel's leadership prevents his suicide. Gabriel brings Mendoza to work at his mission with the natives, and Mendoza finds peace and asks to become a priest. The Church, under pressure, gives the land up to the Portuguese who will allow slave traders in again. Mendoza breaks his vows and organizes the natives to fight against the Portuguese while Gabriel warns him not to fight and instead to help them as a priest. At the end of the movie Fr. Gabr iel courageously leads a procession with the Host through the battle. He is martyred along with almost everyone else. Only a few young natives are left, whom because they have been touched by God, to rebuild the community. This movie, more than most I have ever seen, demonstrates graphically, from a normal, human point of view, the net result of the union of passion and greed, where one compliments the other. The two main reasons the mission is threatened, as I have said before, are imperialism and greed. ...

Alter Your Native Land Essay -- American Culture Cultural Essays

Alter Your Native Land. - Stiff Little Fingers, â€Å"Alternative Ulster,† 1979 By definition, a counterculture possesses values and mores that are in opposition to those of an established society. When one hears the word â€Å"counterculture,† it may prompt images of hippies, punks, demonstrators, or underground political movements – in other words, a group of people (usually young) with a purpose, who are trying to make a change or say something meaningful about the larger culture in which they live. In addition to demonstrations, music, or simply lifestyle choices, this kind of action may be taken in writing. Hunter S. Thompson and Kurt Vonnegut prove this point in Fear and Loathing in Las Vegas and Breakfast of Champions respectively, despite using differing styles, by asking rather contentious questions about American culture. A question raised by Fear and Loathing deals with the typical American ideal: What has become of it? Thompson’s book addresses the question in the very title, â€Å"A Savage Journey to the Heart of the America Dream.† His horrific tale of a gonzo journalist living in a perpetual drug and alcohol-induced haze may at first seem to be only a â€Å"drug book,† but one is able to get much more out of the narrative by taking the time to study it more closely – namely, a statement about the American Dream. After wading through several chapters that describe an assortment of trips brought on by an array of drugs, we find our antagonists getting directions to the American Dream from a taco stand waitress on the outskirts of Vegas. Apparently, the American Dream is now â€Å"a mental joint, where all the dopers hang out.† A dubious, black building has come to represent what formerly stood for opportunity, independence, and free... ...y presenting us with numerous new ways in which to examine American culture, Vonnegut enables us to question everything from common figures of speech to approaches to homosexuality. He may have done this with the hope of preventing the blind acceptance of our society’s norms. Countercultural authors, whether speaking through a haze of narcotics or as if speaking to a child, can play a strong role in establishing new ideologies within a society. Fear and Loathing in Las Vegas and Breakfast of Champions are compelling examples of this, and Thompson and Vonnegut walk into touchy territory while presenting their themes. If one wishes to find an alternative to prevailing modes of thinking, it is important to look upon work such as theirs and discover the answers to their questions about our culture. As the Stiff Little Fingers say, â€Å"Grab it and change it, it’s yours.†

Comparing Feminist Poetry by Plath and Sexton Essay -- Feminism Femini

Comparing Feminist Poetry by Plath and Sexton Poetry "should be a shock to the senses. It should also hurt" Anne Sexton believed (Baym 2703), and evidence of this maxim's implications echoes loudly through the writing of Sexton as well as through the work of her friend and contemporary Sylvia Plath. Plath and Sexton's lifetimes spanned a period of remarkable change in the social role of women in America, and both are obviously feminist poets caught somewhere between the submissive pasts of their mothers and the liberated futures awaiting their daughters. With few established female poets to emulate, Plath and Sexton broke new ground with their intensely personal, confessional poetry. Their anger and frustration with female subjugation, as well as their agonizing personal struggles and triumphs appear undisguised in their works, but the fact that both Sexton and Plath committed suicide inevitably colors what the reader gleans from their poems. However, although their poems, such as Plath's "Daddy" and Sexton's "Little Girl, My String Bean, My Lovely Woman," deal with the authors' private experiences, they retain elements of universality; their language cuts through a layer of individual perspective to reach a current of raw emotion common to all human, but especially female, understanding. In Plath's "Daddy," written just before her death and published posthumously, the most readily accessible emotion is anger, and much of the poem is couched in autobiographical allusions. Plath's own father died of a gangrenous infection, caused by diabetes he refused to treat, when Plath was eight years old, and his death was "the crucial event of her childhood" (Baym 2743). Plath makes personal references to her father as a... ...life struggles and human relationships- of the things women carry with them that make them who they are. Works Cited Baym, Nina. General Editor. "Anne Sexton." The Norton Anthology of American Literature. 5th ed. New York: W.W. Norton, 1998. 2703-4. ---"Sylvia Plath." The Norton Anthology of American Literature. 5th ed. New York: W.W. Norton, 1998. 2742-44. "Electra Complex." The World Book Medical Encyclopedia. Rush-Presbyterian-St. Luke's Medical Center, Chicago. April 2002. < http://www.rush.edu/index.html>. Plath, Sylvia. "Daddy." The Norton Anthology of American Literature. 5th ed. General Editor, Nina Baym. New York: W.W. Norton, 1998. 2748-50. Sexton, Anne. "Little Girl, My String Bean, My Lovely Woman." The Norton Anthology of American Literature. 5th ed. General Editor, Nina Baym. New York: W.W. Norton, 1998. 2707-09.

Common Problems of Belt Filter Press and the Corresponding Solutions

Contact: Mr Wang Phone: +86-18903999962 EMAIL: [email  protected] cn Common Problems of Belt Filter Press and the corresponding solutions Common Problems of Belt Filter Press and the corresponding solutions 1. slurry passentrate filter cloth in a great quantity Maybe caused by: in-correct filter cloth model sizing Poor result for flocculation Shooting method: sizing filter cloth again and select right size and model by testing choose right flocculation agent and right tossing quantity. 2. ilter cloth bad washing result Maybe caused by: Low washing water pressure or few quantity for washing water washing nozzle was fulled by solids and spray water easily shooting method: increase washing water pressure or flow rate clean washing nozzle. 3. lways a great quantity of slurry leakage at the first at the first squeezing roller Maybe caused by: high squeezing pressure poor flocculant result too big flow rate for slurry feeding fast movement for squeezing belts Shooting method: decrease filter cloth tightening force choose right flocculant agent and most suitable flocculant quantity decrease slurry feeding flow rate decrease filter belt running speed. 4. filter cloth flapped Maybe caused by: less tightening force for filter cloth roller axle line are not horizontal Shooting method: adjust tighting force for filter cloth adjust axle line for rollers. 5. ilter cloth connector breakage Maybe caused by: poor holding force for filter cloth connector Shooting method: repair filter cloth connector. 6. filter cloth running in deviation but can't be controlled easily Maybe caused by failure of anti-deviation system un-balanced degree for adjacent rollers Problem shooting method: reset,to shift the failure alarm adjust horizontal degree for rollers. 7. breakage for squeezing rollers Mainly caused by big filter cloth tightening pressure,or rollers was badly corrosive shooting method: decrease filter cloth tightening pressure repair or replace the rollers.

Art: Birth of the Virgin

Description In Pietro Lorenzetti’s triptych, Birth of the Virgin, the artist’s gift for pictorial illusionism is clearly evident. The painting is 6’1’‘X5’11’’ in dimensions and painted with tempera on wood. Lorenzetti enhances the illusion by using various vertical lines as well as painting a column through one of the figures. This creates an illusion of extended space within the painting. Lorenzetti uses shades of red, brown, green, black and blue. The clothing of the figures are darker in shade compared to the background of the scene which is painted in tints of yellow and white. The contrast each other very well and draws more attention to the subject of the painting, Saint Anne. The strong contrast between the light and dark colors of the painting create a three dimensional illusion. Lorenzetti uses the tints of white and yellow to contrast the the wardrobe and appearance of the figures. The artist also used extensive shading on the wardrobe and curtains to add a three dimensional appearance to the painting. Lorenzetti was successful in creating depth within his painting for it shows the room as three dimensional rather that two dimensional. Overall, the colors truly create a sense of drama within this painting. The subject of the triptych, St. Anne, is in a reclining posture. There are three scenes within this painting. First, we see the child informing Joachim on the birth of his daughter. We also see women bringing gifts to the new mother. Lastly, the midwives attend to and wash the new child. The painting has two triangular aspects in this painting with St. Anne at its highest point and also the dome at the top of the triptych as another high point.

Solving Problems and Making Decisions Essay

Background The aim of the cervical screening programme is to reduce the incidence of, and morbidity and mortality from, invasive cervical cancer. This is achieved by screening eligible women between the ages of 25 and 65 years. In my role as an acting Senior Biomedical Scientist in the cytology department, I screen and report negative and inadequate cervical samples in line with XXX protocols as well as facilitating the flow of abnormal cervical samples through to consultant pathologists and ensuring appropriate recall management is given to patients. I am also involved with the supervision of staff and the production and management of in-house standard operating procedures. Description of Problem Although always monitored by XXX, the timeframe from taking a cervical sample to when it was reported has never been given a strict turnaround time target, unlike the screening programme in England, which since 2010 has had a 14-day turnaround time target. However, this is to change as XXX want women screened in XXX to have an equitable service to that of the women in England and with the introduction of new testing alongside the current cervical cytology test, laboratory turnaround times need to be under 3 weeks. In May 2013, the majority of our work was turned-around in 3.5 weeks with only 0.9% of our workload being reported within the proposed 3 week timeframe. Being aware that XXX were likely to implement changes within the next 12 months, we wanted to be proactive and improve our performance before XXX enforce improvement methods upon us or worse the service was moved from XXX. Therefore, the problem was identified as: How can we reduce our turnaround times to under 3 weeks (from date received in laboratory to date authorised)? Analysis of the Problem We were aware as a service that our turnaround times had increased over the last couple of years due to the loss of staff through retirement and centralisation and due to the transportation of work to an off-site laboratory for processing and then its transport to our department for screening and reporting. However, to identify the areas that we could improve, we created a work-stream to understand the flow of work through the laboratory process. A simplified version of the work-stream is found below: (Removed for confidentiality reasons) The days in the green ovals are average accumulative working days it would take to achieve a reported sample from arrival at the laboratory. These are working days and do not include weekends, therefore it is possible a further 2 to 4 days could be added to the actual turnaround time, making a possible estimated laboratory turnaround time of between 4 and 10 days. These days are calculated with no backlog, and therefore the next step would be to identify were backlogs or bottlenecks were occurring. The processing of work at XXX was beyond our control. As was the transport to and from XXX, which occurs on alternative days and is governed by XXX. Therefore, the two areas we could concentrate on were the booking in and the screening of slides. In May 2013, the administration staff based in XXX had a slight backlog of samples to book in, this equated to 1 to 2 days delay. The main cause of this delay was lack of staff and it wasn’t something we could address immediately as recruitment of new staff would take time and screening staff could not help as the backlog and delay in slides being screened was even greater. In the same month, the backlog of slides waiting to be screened was estimated at 2 to 3 weeks, this equated to around 3000 slides waiting to be screened. The backlog of screening work was not only affecting swift results to the patients it was also having an effect upon the screening staff morale as they had to see large numbers of slides waiting to be screened, which  could affect the turnaround further. We were also notified at this time that a member of the screening team would be leaving and therefore the urgency in reducing our turnaround times became more imminent as we would have less staff in a month or two. If no action was taken now the turnaround times would increase further once the member of staff left. As a result, the area we need to concentrate on and identify possible solutions to was the matter of reducing screening times of slides, by attacking this element of the laboratory process we should be able to reduce our overall laboratory turnaround times. Identification of Possible Solutions The Cytology senior staff members, including myself, started with a brain-storming exercise of trying to identify possible solutions. Due to constraints and safe-practices put in place by the NHS Cervical Screening Programme (NHSCSP) and XXX it is not possible to ask screening staff to screen each slide faster, as false positives and false negative results would increase and the quality would be affected. And we could not ask staff to screen for a longer length of time in the day, as screeners can only primary screen slides for a maximum of 5 hours a day, again due to the quality risk. However, staff could work overtime by coming in at weekends. To try and improve the workflow pathway within the screening room I decided to re-read the †Cytology improvement guide – achieving a 14 day turnaround time in cytology† produced by the NHSCSP when England was undergoing changes to its screening programme turnaround times. This guide is a collection of evidence-based ideas for improving workflow and turnaround times in the laboratory and administration departments of the cervical programme. We had already adopted one suggestion from the guide in 2010 regarding batching sizes of work, whereby we have reduced the number of slides in a tray from 20 to 8 slides. Although each slide was still being screened for the same time length, a tray of slides were being finished quicker and therefore the screening staff felt happier and kept the work flowing through  the laboratory. However, on inspection the work wasn’t flowing, as after primary screening, trays were being placed into the rapid review box and only taken out for review twice a day (first thing in morning and after lunch), with some staff only reviewing slides once per day. This was causing the first bottleneck and it was also having a knock-on effect on the authorising of samples by senior staff as large chunks of authorising was occurring first thing in the morning or after lunch, which due to the monotony of checking details and results was causing errors to occur in reporting. We therefore needed to undert ake a Lean transformation. Lean is an improvement approach to enhance flow and eliminate waste that was developed by Toyota. Lean is basically about getting the right things to the right place, at the right time, in the right quantities, while minimising waste and being flexible and open to change. Lean thinking focuses on what the customer values, any activity that is not valued is waste. If you remove the waste, the customer receives a more value-added service. In our department this means reducing our turnaround times, so that the customer (XXX women) get their cervical results in 3 weeks. We therefore had to remove processes that were not adding value to the end result. By investigating further it was noted that some screening staff were writing on the front and the back of the sample request forms if the samples were negative. There was no benefit in duplicating the result on the back of the form and therefore as part of Lean it is considered waste. Distraction was also a large issue in the screening room. To screen and report slides, it requires concentration to process and distinguish abnormal cells from normal samples. However, staff were regularly stopping screening to chat or employees from other departments were coming in to talk, make a cup of tea or to eat biscuits causing distractions of up to 30 minutes at times. The telephone was also a regular distraction, with service users phoning up for advice and results and the XXX administration department phoning up regularly to change and update patient managements. Summary of Options We eventually decided the options available to us were: 1. Screening staff to work overtime. If every member of the screening team and senior team (Senior Biomedical Scientist and Cytology Manager) were to partake in overtime work on one day of the weekend and managed to screen an average of 30 slides per day the backlog could be cleared in 9 to 10 weekends. However, partaking in overtime is a voluntary decision and not all staff members would want to or be able to work overtime. This means that if we were to only adopt overtime as an option a minimum of 9 weekends would need to be worked, and as we were not changing the day-to-day workflow process a further period of overtime may be needed in the future to minimise any further backlogs. Working overtime also had a cost implementation, as staff would need reimbursing for their time given. As overtime would be over a weekend this would be calculated at time and a half pay. 2. One tray of primary screening followed by one tray of rapid reviews. To overcome the current bottleneck of work after primary screening, it would be more advantageous to rapid review slides little and often instead of first thing in the morning or after lunch. The preferred scenario would be to primary screen a tray of slides and then screen a tray of rapid review slides and alternate like this throughout the day. This means the throughput of work is more constant and turnaround is less. These examples explain this option further: Current example – As you can see this example of current working practice means the slides take approximately 22 hours from being initially primary screened to being authorised. Proposed example – This example shows that by alternating between primary and rapid review screening the whole process up to authorising should take approximately 75 minutes. A saving in time of 20 hours and 45 minutes for those 8 slides to be reported and authorised. Some work primary screened at the end of the day will have to wait until the next day for rapid review, but on the whole most work will be turned around at a much faster pace. This could be implemented immediately with no cost implications or changes to staffs working pattern. 3. Authorising work little and often. The examples used above also outline how this can improve the bottleneck between rapid review and authorising. Currently authorising is carried out in large batches after rapid review has been completed mainly at lunchtime and occasional first thing in the morning. These large batches of work are monotonous and transcription errors can arise due to this. By having rapid review completed in small batches of 8, it is possible for senior staff to authorise in these small batches as soon as rapid reviews have been completed. This means authorisation can be achieved much sooner and hopeful reduce the risk of mistakes occurring. 4. Reduce waste. A Lean approach was considered and any process that didn’t add value was removed. The first wasteful process identified was writing on both front and back of request forms, writing on the back was considered worthless. This process approximately took 10 seconds to carry out. Therefore if this was stopped each screening staff member screening 30 slides a day on average would save 300 seconds a day. This equates to 5 minutes, which is more than enough time to screen one or two extra slides a day. Which over a week could mean 10 extra slides been screened by one screening staff member or 80 slides a week if all screening staff stopped. The second process considered was the taking of primary screening work from the work pile before necessary. Some individuals would pick up 2 trays of primary screening or would leave unfinished trays on their desks overnight. If these trays were left in the pile or half trays placed back into the work pile before going home, it would allow another member of staff to screen them sooner and therefore have them moving along the work-stream quicker. 5. Adopt quiet-time. The most controversial option considered was to implement quiet-time in the screening rooms. An initial quiet-time of between 9.30am-12.30pm and 1.30-3.30pm was suggested, asking all staff member to keep any talking to  work-related questions only and to deter any colleagues from other departments from coming into the screening room or phoning the department. No mobile phones would allowed in the department during these times and work emails were to be checked first thing in the morning or first thing after lunch. Evaluation of Options The NHSCSP advise on using a PDSA cycle (plan, do, study, act) to evaluate and to test out ideas to ensure changes make the improvement required before implementation. Although the cycle is good at temporarily trialling a change and assessing its impact, it’s not useful in highlighting the best option or options to adopt without trialling them all. We therefore need to analyse the strength and weakness of each option first. A decision matrix was created to evaluate and prioritise the 5 options above. The criteria we used to make the decisions were: Cost implications; would there be any extra cost involved with each option and was this a small or large cost. (Rated from 1 (high cost) to 3 (low cost)) Speed of implication; were we able to implement this option immediately or would it require much planning. (Rated from 1 (slow) to 3 (fast)) Effect on staff; would the staff be happy with these measure, would it cause a negative effect in the work place. Did the staff have to make large adjustments to their working practice. (Rated from 1 (high detriment) to 3 (low)) Speed of improvements; how long would it take for us to see a change in turnaround times if option was implemented. (Rated from 1 (slow) to 3 (fast)) Each option was rated for each criterion, so that we could establish any issues with each option. From looking at the table above, options 2 and 3 have scored well on all 4 criteria and therefore would be able to be implemented with little disruption but with a good impact on turnaround times. Option 1 unfortunately had too many issues regarding cost and the time it would take to gain agreement for funding the overtime and for staff to agree to giving up their free weekends. Also every staff member wasn’t able to participate due to personal commitments and families, this meant the overtime worked could vary greatly week to week. It was therefore decided options 2 and 3 would be trialled further and option 1 would be abandoned. Although option 4 would take time to see results, it was decided that by ‘Leaning’ up the work process could only be a good thing and that the ideas suggested to reduce waste in the workplace should be implemented immediately. The main cause for concern with option 5 was the detriment to the staff,  however this change to working practice was considered to be the one that would have the greatest affect on reduction of turnaround times. It was therefore decided to trial this for a while, and that once the backlog was reduced we could relax the quiet time option and re-implement it if the backlog was to increase again. We could now look at the PDSA cycle and using turnaround time as a measurement assess the capabilities of option 2,3,4 and 5. By starting to trial the options and regularly monitoring and studying the turnaround times (Do & Study) we can highlight any changes that may be necessary (Act) and think of new plans to tackle any issues that arise (Plan). Implementation Before implementing and disseminating the information to all the staff, the cytology manager and cytopathologist went over all the presented options and made the final decision to implement the improvements for reducing turnaround times. They were happy to put forward the 4 options identified to all the staff and create action plans for implementation. A staff meeting was held to explain the situation regarding increasing turnaround times and the options put forward in the form of an action plan to the staff on how we could reduce the turnaround times. The action plans presented were: It was important to us to use SMART action plans, which meant we had to be specific in our actions and create measurable, achievable and realistic plans. An achievable time frame was set by creating weekly and monthly milestones for reviewing our turnaround times. Staff were asked to provide their thoughts on these actions and identify any issues or bring forward any options not already covered. Staff members made known their fears regarding quiet time, with one staff pointing out their working times were 9.30am until 2.30pm, and therefore apart from lunchtime she cannot talk during her working hours. This was taken into consideration  and the hours of quiet-time were altered. It was also stated the quiet time was a short term proposal and would be lifted as the backlog reduced/ended. An idea of moving the boxes holding the work needing rapid review and the boxes holding forms for authorising was also put forward. As currently the boxes were located across two different rooms and in the furthest corner of one room, meaning the entire screening room was being disturbed when someone went to put work/forms in the boxes. By moving the boxes to an equidistant place between both room, it would reduce the time wasted in walking to the boxes and reduce disturbance to other staff. Therefore the new and modified action plans were added. The staff was also advised that the turnaround times would initially be monitored in-house on a weekly basis to trial these changes and if the turnaround times were improving the monitoring would default to the XXX monthly monitoring. The aim was to try and authorise 300 cases a day, this was a realistic number to screen between 8 screening and 2 senior biomedical scientist staff. This equated to 1500 slides a week authorised, and as approximately 1000 slides were received and booked in each week, this meant we would be clearing approximately 500 slides from the backlog each week. Review of Outcomes Work levels were reviewed weekly by the Cytology Manager using the laboratories computer system. It was possible to see that the workload being reported was greater than that of the workload coming into the laboratory, and therefore the backlog of work was decreasing. However, what helped staff morale and made them aware of a reduction in the backlog and an improvement in turnaround times was being able to visualise the time between the date the sample was taken and the date the sample was screened and also seeing the reduction in the pile of work that was waiting for screening. As all options were implemented at the same time it was not possible to identify the effects of each individual option. XXX were also gathering the 3 week turnaround figures for all laboratories and these were being disseminated amongst the screening staff on a monthly basis. From the graph provided by XXX, it is clear from the implementation of changes in June 2013 the percentage of samples turned around in less than 3 weeks has steadily increased. A slight dip in the percentage is noted between August and September 2013, this coincided with the loss of a staff member and a move to a new laboratory building, which resulted in screening down-time for a couple of working days. It was at this time a decision was taken to stop the strict enforcement of quiet time, allowing the occasional ‘chatter’ within the screening room. This made work more welcoming and created a happier work environment, this in turn seems to have helped in the increase of samples turned around in 3 weeks. The introduction of these measures over the past 12 months have seen the departments 3 week turnaround times increase from 0.9% to 100%. References NHS Cervical Screening Programme (NHSCSP) – Cytology improvement guide: achieving a 14 day turnaround time in cytology NHS Cervical Screening Programme (NHSCSP) – Continuous improvement in cytology: sustaining and accelerating improvement

Rich vs. Poor

? A man’s economic status is based solely on his wealth and his material possessions, or lack thereof to define him as being â€Å"rich† or â€Å"poor. † Similarly, these two words, â€Å"rich† or â€Å"poor,† should also describe a man’s character. Rich is characterized as having a lot of money or possessions: valuable, meaningful, or significant. Poor is characterized as deficient in amount or indicating poverty. Yet, when we look at a man or woman, do we judge them by their wealth or by the â€Å"richness† or â€Å"poorness† in their character? Through observations of the rich, a man or woman who has obtained richness often times are lacking in character traits that makes up a good man or women. For example, Donald Trump as a billionaire is shrewd in making money and his personality is one of hostility. We all are familiar with his famous two words,† You’re fired! † Donald Trump, although rich as a child, n ever grasps the fundamental character traits of kindness, gentleness and peace. We can come to this conclusion based on the number of times he was married.This shows the lack of character Donald Trump has because a marriage should be a long term commitment, and it was easy for him to give up on many of his marriages for the next pretty woman who came by in his life. I believe that most people, like Donald Trump, who are rich in material possessions, typically are â€Å"poor† in character. They tend to be very aggressive toward others, not taking into consideration the feelings of others. Most rich people remind me of Ebenezer Scrooge, an unpopular, grumpy, elderly British male human. He was a banker and a usurious moneylender.He worked at a counting house. He was disgusted by the poor and praised workhouses. And he hated Christmas! The point here is, during the night before Christmas, Scrooge was visited by four spirits, who showed him that he hadn't always been so miserable, that he should love Christmas, and that his actions have massive consequences, and if he didn't change his ways, it would be all the worse for him! Many rich people carry a similar attitude of superiority and that there is no need to demonstrate acts of kindness to anyone that is financially below them. Consequently, a man who is â€Å"poor† in material possessions many times is â€Å"rich† in character, which is spiritually defined as the nine fruits of the spirit: love, joy, peace, longsuffering, kindness, goodness, faithfulness, and self-control. Having friends and family members who grew up poor and who worked hard to survive to obtain material possessions, their character was strengthened or made â€Å"rich† as a result of it. They had to do the jobs that many rich people would never do, such as being a maid, construction worker, janitor and many more domestic type jobs.Although they differ in terms of definition, being â€Å"rich† and being â€Å" poor† in character can be one of the same as â€Å"poor† in spirit or humble. For example, my great grandmother was an Indian who was very poor, but you never would have known it because she was humble, kind, loving and a peaceful woman who always shared everything she had. ? Without a doubt, those who are â€Å"rich† and those that are â€Å"poor,† in terms of material possession, share a similarity: the desire to be rich or richer. No one really wants to be â€Å"poor. Those who are rich are rich through inheritance or have mastered the know-how to become rich. Such as Prince Williams, who obtained his wealth from his mother and father, Princess Diana and Prince Charles of Whales. Those who are poor have lived in poverty, for the most part, all of their lives. Many of them have not mastered the know-how to obtain riches. This is evident from looking at the statistics in the inner cities and in very rural areas. Regardless of their economic status, howev er, one desires to be rich and the other desires to be richer.The poor would like to live a stress free lifestyle without worrying if there will be food on the table, and the rich want to obtain their fortunes as well as continuing to have their success grow. ?In terms of how the rich communicate with others, the rich typically show confidence and are normally very secured individuals. The rich communication skills have embellished their ability to obtain wealth and to succeed at many other aspects in their life. The Rich, like Donald Trump have many people looking up to them. So it’s almost a responsibility to show no fear and to take charge in everything they do.If Donald Trump were to show lack of Confidence many people would not respect him or believe he had the skills to succeed as a multi billionaire. ?On the other hand, in terms of how the poor communicate with others they generally lack confidence and many times they are very insecure. The poor’s communication skills are generally slang, bad grammar, or rap which decreases their ability to communicate effectively. My cousin Brittney, who grew up in North Philadelphia, was surrounded in bad neighborhoods, run down schools, and no one to look up to.When her mother finally decided to get her out of the area it was very difficult for my cousin to adapt to a better lifestyle. Brittney was use to the ghetto lifestyle that she thought it was the norm. When Brittney’s mother enrolled her into a public school in Fairfax it was a challenging scene for Brittney. She didn’t know how to interact with the other children because her dialect was nothing like theirs and she was not secure with who she was. Therefore she lost all hope and confidence.There are several ways to work on ones confidence but they have to be willing to work on them. ?Being â€Å"rich† or being â€Å"poor,† as Webster Dictionary defines it, does not determine a man’s richness or poorness in his o r her character but defines it as his economic status. Therefore, regardless of your material possessions, we should all strive to achieve the nine fruits of the spirit. Then we can honestly say that we are rich and/or poor. It’s up to us to follow acts of kindness, whether we are â€Å"rich† or â€Å"poor,† if we want to achieve a better quality of life.

Writing Reading, and Researching in My Major Essay

Writing Reading, and Researching in My Major - Essay Example Accounting major is a study concerned with the measurement, analysis, evaluation and reporting of information including computerized information which assists the managerial in organizing of the resources of business entities and government organization. The accounting major comprises of both theory and practice to prepare students for analysis and reporting regarding the economic activity of business organizations and communication of that information to managerial heads. In major, the students acquire skill in managerial accounting, accounting system, budgeting, internal contrails, financial analysis, taxation, internal and external auditing, financial reporting and international accounting. The major prepares the student for a range of careers in accounting in business of profit, non – profit and also for government firms. With a major in accounting a person will be able to work efficiently with interdisciplinary professionals and diverse stakeholders. They can interact with financial and non – financial audiences in a concise and clear manner by taking appropriate decision with reliability, relevancy and accusation. They can research on financial matters and analyze business data by applying management and accounting principles and understand the standards that apply to business reports. He a proficiently use current technology and analytical tools to work on business functions work integrally with team and facilitate on decision making. This major helps in taking critical thinking problem solving and validate processes, and analyzing financial data and apply current and emerging ethical standards. However the major in accounting has many requisites and the student who satisfy them can get an admission for the same. The reading done in accounting would be basically conceptual framework of accounting. The financial accounting standards